MODULAR SPREADER BEAMS
With one of the highest total capacity (9T – 1,350T) and the greatest length on the European market
With one of the highest total capacity (9T – 1,350T) and the greatest length on the European market
The modular spreader beams from OX & RUD Lifting Solutions are adjustable and can achieve spans of up to 36 m thanks to variable strut lengths and are suitable for loads of 2 to 1,350 t. Modular spreader beams with a capacity of 9 to 600 t and a length of between 1 and 30 m are in stock and can therefore be delivered at short notice (subject to prior sale).
All standard models from the OX-SB 9 to the OX-SB 1350 have DNV-GL type approval.
Each component is provided with a nameplate so that it can be assigned quickly and safely. The load capacities at different lengths are detailed in the user manual.
There are numerous benefits to using modular spreader beams. We have therefore briefly summarized the main arguments for you here:
All standard models of modular spreader beams from OX-SB 9 to OX-SB 1350 have DNV type approval.
The spreader beams have a lower dead weight compared to rigid, solid load beams, which has a positive effect on the overall weight of the slings. This weight reduction allows the crane, for example, to have a smaller lifting capacity. In addition, transport is easier to manage. Ultimately, costs can be saved in this way.
Thanks to the modular construction system, the spreader beams from OX & RUD Lifting Solutions are not only easier to transport but also easier to store. The easy handling enables the spreader to be set up and dismantled quickly on site.
The individual struts in different lengths enable the spreader beam to be flexibly adapted to the respective requirements of the lifting process. Various combinations of the individual components give you a lot of flexibility in terms of span, load capacity and anchor points. With a small investment in suitable corner pieces, you can also use the existing components to create a spreader frame with four attachment points and a low overall height. So you can easily respond to short-term inquiries from your customers!
The spreader beams can be combined with each other so that you get additional attachment points for your load. In the 1-over-2 configuration, another spreader beam is hooked under a modular spreader beam at the respective end unit, so that there are four anchor points. This principle can be taken even further, giving you more lifting points. You can find a graphic showing the various configuration options under the corresponding menu item.
The Spanish manufacturer OX & RUD Lifting Solutions offers a wide range of spreader beams and has many components in stock so that short-term deliveries can also be made. Of course, the subject of prior sale is always reserved.
Due to the modular principle, the individual components are much smaller in size than a complete spreader beam. This means that the spreaders can be delivered easily, which reduces transport costs. Special transport is not required here.
The components of the modular spreader beams are closed on the sides. This prevents the entry of moisture and the associated corrosion. These spreader beams are therefore ideal for shipping, the offshore sector and the oil and gas sector.
The modular spreader beams from OX Worldwide can be used in different configuration options:
Due to the flexible customization options, you can use the modular spreader beams from OX & RUD Lifting Solutions for a wide variety of loads, such as lifting containers, boats or silos.
The modular spreader beams can be used as a cascade, hanging one above the others, to reach four or more anchor points. Depending on the arrangement of the spreaders, these lifting points can be on a line or in the respective corners.
For even more flexibility, the modular spreader beams can be expanded since 2022 with a telescopic strut, which can be adjusted in length without losing its load-bearing capacity.
Structural steel and steel with a high elastic limit are used to produce the spreader beams. These are optionally available with a 3.1. Material certificate.
Finish:
Additional options:
The company OX & RUD Lifting Solutions is ISO 9001:2015 and ISO 3834-2 certified. The following guidelines are used for design and production:
The standard versions of the modular spreader beams have DNV-GL type approval. This includes:
The sling angle influences the required sling length and the load capacity of the modular spreader beam. In general, it should be noted that the angle of the upper sling ropes must never be greater than 45°. For information, the manufacturer has created the following graphics:
Sling angle of 20°
B = X x 1.46
C = X x 1.37
Sling angle of 30°
B = X = 30°
C = X x 0.87
Sling angle of 45°
B = X x 0.71
C = X x 0.50
Important notes:
We would be happy to provide you with a complete offer for the modular spreader beams. Just ask us about suitable shackles and slings!
You can easily find out which modular spreader beams fit from the load capacity and span table. Finding the right spreader beam model for a regular lifting process is very easy: first select the required load capacity and then the required span, and you will receive the variant that best suits your current project.
Please ensure that the capacity limits are adhered to. If the weight to be transported is at a limit, it is advisable to select the higher category and therefore the more stable model. If the nominal load capacity is exceeded, occupational safety is no longer guaranteed.
We would also be happy to advise you on more complicated lifting processes. These could be, for example:
By clicking on the tables you can see exactly for each model type how the load-bearing capacity of the modular spreader beams changes due to the sling angle and span.
Do you need to lift a very long but not very heavy load? – The cone adapters for modular spreader beams from OX & RUD Lifting Solutions are the solution here.
The cone adapters are placed between the end unit and the outer strut. In this way it is possible to combine the struts of a larger assembly with end pieces of a smaller assembly (with the correspondingly smaller drop links and shackles). The struts themselves therefore have a higher load capacity than the end units used. These “actually oversized struts” are then used to achieve the length that corresponds to this assembly, which could not have been achieved with the smaller end units and drop links.
This allows the user to use the existing spreader beam with a larger span without having to enlarge the complete beam model in terms of the end units, drop links and shackles.
This saves enormous costs and weight. With the appropriate lighter slings, easier and faster handling is possible.
The advantages of using cone adapters are briefly summarized:
By using the conical adapters, not only smaller and lighter end units can be used. As a result, the other components are also reduced, such as drop links, shackles and slings.
The use of smaller and lighter components and slings ultimately means cost savings for you.
As with the spreader beams from OX & RUD Lifting Solutions, structural steel and steel with a high elastic limit are used to manufacture the cone adapters. These are optionally available with a 3.1. Material certificate.
Finish:
The maximum possible length depends on the model type of struts. However, the maximum load capacity depends on the properties of the end units. For example, when using cone adapters of type 110/50, the nominal load capacity table for the modular spreader beam looks as follows:
These adapters are available in addition to the following spreader beam models from OX & RUD Lifting Solutions.
If you have any questions about this delivery program, we will be happy to help you.
Strut | End unit |
---|---|
34 | 17 |
50 | 17 |
50 | 24 |
70 | 24 |
70 | 34 |
70 | 50 |
110 | 24 |
110 | 34 |
110 | 50 |
110 | 70 |
Strut | End unit |
---|---|
170 | 34 |
170 | 50 |
170 | 70 |
170 | 110 |
250 | 50 |
250 | 70 |
250 | 110 |
250 | 170 |
Strut | End unit |
---|---|
400 | 70 |
400 | 110 |
400 | 170 |
400 | 250 |
600 | 110 |
600 | 170 |
600 | 250 |
600 | 400 |
Strut | End unit |
---|---|
800 | 170 |
800 | 250 |
800 | 400 |
800 | 600 |
1350 | 250 |
1350 | 400 |
1350 | 600 |
1350 | 800 |
Dear visitors,
It is very important to us that you can use our website to its full extent and that you can quickly find the information you want about us and our products. Please agree to the use of cookies so that we can provide you with the best possible service based on your data. Of course, you can withdraw your consent at any time under "Settings" or adjust your details.
We may request cookies to be set on your device. We use cookies to let us know when you visit our websites, how you interact with us, enhance your user experience and customize your relationship with our website.
Click on the different category headings to find out more. You can also change some of your preferences. Note that blocking some types of cookies may impact your experience on our websites and the services we are able to offer.
These cookies are strictly necessary to provide you with the services and features available on our website.
Because these cookies are strictly necessary to provide you with the services and features available on our website, rejecting them will impact how our website works. You can block or delete cookies at any time by changing your browser settings and force blocking all cookies on this website. However, you will always be asked to accept/reject cookies when you return to our website.
We fully respect your wish to reject cookies. To avoid being asked for cookies again and again, please allow us to store a cookie for your preferences. You can opt out at any time or allow other cookies to fully use our services. If you reject cookies, all cookies set on our domain will be removed.
We will provide you with a list of cookies stored by your computer on our domain.
For security reasons, we cannot show you cookies stored by other domains. You can view these in the security settings of your browser.
These cookies collect information that - sometimes in aggregate form - helps us understand how our website is used and how effective our marketing measures are. We can also use the knowledge gained from these cookies to adapt our applications to improve your user experience on our website.
If you do not want us to track your visit to our site, you can block this in your browser here:
For more information about our cookies and privacy settings, please visit our privacy page.
Datenschutz